Automated manufacturing equipment inside an industrial production facility

Industry: Electrical Equipment Manufacturing

Solution: Manufacturing Process Planning and Digital Work Instructions

Platforms: PTC ThingWorx and PTC Windchill

Process Area: Process Planning, Document Management and Shop-Floor Execution

Users: Manufacturing Engineers, Process Engineers and Shop-Floor Operators

Automated manufacturing equipment inside an industrial production facility

Industry: Electrical Equipment Manufacturing

Solution: Manufacturing Process Planning and Digital Work Instructions

Platforms: PTC ThingWorx and PTC Windchill

Process Area: Process Planning, Document Management and Shop-Floor Execution

Users: Manufacturing Engineers, Process Engineers and Shop-Floor Operators

Project Overview

Project Overview

For manufacturing engineers, creating a work instruction is rarely just a matter of writing down a sequence of steps. An operation may depend on the right work center, checks, drawings, controlled documents and sub-operations being available together before the job reaches production.

PSP Tech Hub enhanced an existing ThingWorx Process Plan Editor to make that process easier to manage.

The application was connected with PTC Windchill, allowing engineers to reuse existing operation data, work with copied operations as drafts, search for released manufacturing documents and CAD drawings, and prepare detailed digital work instructions without moving between disconnected processes.

The implementation creates a practical link between manufacturing process planning, controlled product documentation and shop-floor execution.

Instead of rebuilding a similar operation from the beginning, an engineer can start with information that already exists, adapt it for the new requirement, attach the appropriate Windchill documentation and decide when the changes are ready to be saved.

The completed functionality was validated through 22 unit test cases, covering operation copying, sub-operations, document search, document rules and save behavior. All 22 tests passed.

The Challenge

The existing process-plan application already gave manufacturing engineers a way to create operations and step-by-step instructions for production jobs.

The difficulty was what happened around that authoring process.

When a new operation was similar to something already created, engineers could still spend time rebuilding the same type of information. Supporting drawings and documents also needed to be uploaded or managed separately, making document selection another step in preparing the operation.

There were several specific issues to address: 


  • Similar operations were being created repeatedly instead of reused. 


  • Manufacturing drawings and supporting files could require manual upload. 


  • Engineers needed a better way to work with the appropriate released documentation. 


  • Edits could be saved before the engineer was ready to commit them. 


  • Official Windchill documents needed to remain distinct from operator-uploaded files. 


  • Long work instructions and check descriptions needed better formatting. 


  • Reused operation data needed to be reviewed before it was made available for production. 


The goal was not to replace the existing application.

The requirement was to make process plan management more efficient while preserving control over engineering changes and connecting the authoring process more closely with Windchill document management.

The Solution

The Solution

PSP Tech Hub enhanced the existing ThingWorx Process Plan Editor around the way manufacturing engineers actually prepare an operation.

The solution combines operation reuse, draft-based editing, controlled saving, rich-text authoring and access to Windchill documents within the process-planning workflow.

This gives engineers a more direct path from an existing process operation to a reviewed, documented instruction ready for shop-floor use.

Reusing an Existing Operation as a Starting Point 


Not every new manufacturing operation needs to begin with a blank form. 


Engineers can select an existing work order and operation, then bring relevant information into a new operation. 


Reusable information includes: 


  • Work center 


  • Description 


  • Checks 


  • Documents 


  • Sub-operations 

The important distinction is that copied information does not immediately become a finalized production operation.

It begins as a draft operation.

The engineer can review what was inherited, remove information that does not apply and modify the remaining details for the new manufacturing requirement.

This makes manufacturing process planning faster without treating reuse as automatic approval.

Bringing Windchill Documents into the Process-Planning Workflow

Bringing Windchill Documents into the Process-Planning Workflow

A manufacturing operation can depend on much more than written instructions. Drawings and supporting engineering documents are often part of the information needed to complete the work correctly.

The enhanced application connects the ThingWorx manufacturing workflow with Windchill document management.

Engineers can search Windchill using a document name or number and identify the appropriate released document or CAD drawing associated with the part.

The selected information can then be connected with the relevant operation.

This removes the need to treat every supporting file as an isolated manual upload and creates a closer relationship between manufacturing documentation, process-plan authoring and the instructions presented for production.

It also gives the solution a clear PLM integration role: Windchill remains connected to controlled product and document information while ThingWorx provides the working application experience for manufacturing users.

Giving Engineers Control Over When Changes Are Saved

Giving Engineers Control Over When Changes Are Saved

A small change in application behavior can make a significant difference when engineers are preparing production information.

The enhanced editor does not treat every modification as something that should immediately become persistent.

Changes to descriptions, documents, work centers and checks are committed when the engineer intentionally selects Save & View.

If the page is closed before saving, those changes are discarded.

This allows an engineer to make several related modifications, review the operation as a whole and decide when it is ready to be saved.

For process plan management, this creates a clearer boundary between editing an operation and committing the changes.

Separating Controlled Documents from Operator Uploads

Separating Controlled Documents from Operator Uploads

Not every file associated with an operation has the same purpose or level of control.

The application therefore distinguishes official Windchill documents from files uploaded by operators.

Controlled Windchill documents are protected within the applicable workflow. Operator-uploaded documents can be deleted when necessary, but deletion requires confirmation.

This separation helps prevent a controlled manufacturing document from being treated like a temporary shop-floor attachment.

It also gives users a clearer understanding of which information originates from Windchill PLM and which content was added separately during manufacturing activities.

Making Detailed Work Instructions Easier to Author

Making Detailed Work Instructions Easier to Author

Short descriptions may work for simple operations, but some production activities require more explanation.

A rich-text editing capability was added for longer work instructions and check descriptions.

Manufacturing engineers can organize and format detailed instructions more clearly, making the editor more practical when an operation requires additional production context.

The improvement supports the creation of digital work instructions for manufacturing without forcing detailed content into basic text fields.

How Does the ThingWorx and Windchill Workflow Work?

How Does the ThingWorx and Windchill Workflow Work?

The workflow connects process-plan preparation with the documents and instructions required for production.

1. Open the Process Plan 

The engineer opens the required job and process plan in the ThingWorx Process Plan Editor. 

2. Create or Reuse an Operation

The engineer can create a new operation or select an existing work order and operation as the starting point. 

3. Review the Draft

When an operation is copied, the new operation begins as a draft. Its work center, description, checks, documents and relevant sub-operations can be reviewed and adjusted. 

4. Find the Required Windchill Document

The engineer searches Windchill using a document name or number to locate the required released document or CAD drawing. 

5. Associate the Document with the Operation 

The selected documentation is connected to the operation being prepared. 

6. Complete the Work Instructions 

The engineer updates the description, checks, work center and other required operation information. Longer instructions can be structured using the rich-text editor. 

7. Review Before Saving

Once the information has been checked, the engineer selects Save & View to commit the changes.

8. Use the Instructions on the Shop Floor 

Operators work with the completed instructions during the required production activities. 

9. Return Job Information to Windchill 

After the required operations are complete, the associated job data is sent back to Windchill. 

Connecting Process Planning, PLM and Shop-Floor Execution 

The value of the implementation is not in one isolated feature. 

Operation copying reduces repeated authoring. Drafts provide room for review. Windchill document search brings controlled information closer to the manufacturing operation. The Save & View behavior gives engineers control over committing changes. Rich-text editing makes detailed instructions easier to prepare. 

Together, these capabilities connect manufacturing process planning, PLM integration, digital work instructions and shop-floor execution through the same operational workflow.

The solution uses: 


  • PTC ThingWorx as the manufacturing application interface 


  • PTC Windchill for controlled documents and connected job information 


  • Process-plan and operation services 


  • Sub-operation services 


  • Process-plan validation 


  • Windchill document search 


  • Document attachment services 


  • ThingWorx database and file storage 

This architecture allows product and manufacturing information to remain connected without forcing engineers to manage every part of the process as a separate activity. 

For manufacturers working to connect engineering information with production, this type of ThingWorx and Windchill integration creates a practical bridge between the systems where manufacturing information is managed and the point where that information is used.

What Changed for Manufacturing Users?

What Changed for Manufacturing Users?

Engineers can build a new operation from relevant existing information instead of recreating every field, check and sub-operation manually.

Better Access to Manufacturing Documentation

Released documents and CAD drawings can be located through Windchill and associated with the corresponding operation.

A Review Step Before Production Use

Copied operations begin as drafts, giving engineers an opportunity to check the information before it becomes part of the production workflow.

Intentional Saving of Process Changes

The Save & View behavior means that edits are committed when the engineer chooses to save them rather than simply because a field was changed.  

Clear Separation of Document Types

Controlled Windchill documents remain distinguishable from operator-uploaded files. 

Better Authoring for Detailed Instructions

Rich-text editing gives engineers more flexibility when preparing longer shop-floor instructions and check descriptions. 

A Connected Manufacturing and PLM Workflow

Process plans, documents, work instructions and completed job information are handled through a connected ThingWorx-Windchill workflow instead of functioning as unrelated pieces.

Testing and Validation

Testing and Validation

The enhanced functionality was verified using 22 unit test cases. 

Testing covered key areas of the implementation, including: 


  • Windchill document search 


  • Document handling rules 


  • Operation copying 


  • Sub-operation behavior 


  • Save functionality 


All 22 unit tests passed.

This testing provided a clear validation point for the functionality implemented across the process-plan and document workflows.

Design Approach

Manufacturing Application

PTC ThingWorx

PLM and Document Management

PTC Windchill

Solution Areas 


  • Manufacturing Process Planning 


  • Digital Work Instructions 


  • Process Plan Management 


  • PLM Integration 


  • Manufacturing Execution 


  • Manufacturing Document Management 


  • Operation and Sub-Operation Management 


  • CAD Document Access 


  • Shop-Floor Execution 

Conclusion 

This project was not about adding another layer of software to the manufacturing process. 


It was about making the existing ThingWorx Process Plan Editor more useful at the point where manufacturing engineers prepare operations for production. 


Engineers can reuse existing operation information without treating it as finished work. They can find controlled Windchill documents while preparing the operation, review copied information as a draft and decide when changes are ready to be committed. 


For shop-floor users, the result is a more structured connection between the instructions they receive and the manufacturing information behind those instructions. 


By connecting ThingWorx, Windchill, manufacturing process planning and digital work instructions, PSP Tech Hub established a workflow that keeps engineering documentation and production execution closer together without adding unnecessary steps for the people using it.

Frequently Asked Questions

@Copyright 2026, All rights reserved by @PSPTECH HUB Pvt Ltd.

Transforming manufacturing with smart tools, designed for real results.

@Copyright 2026, All rights reserved by @PSPTECH HUB Pvt Ltd.